Adhesive & Sealant Technical Guides

Heat resistance, peel strength and the cost gap — and when the cheaper one is genuinely the right answer.

What changes moving off solvent — drying, heat, substrates, VOC and shipping — and the test that settles each trade-off for your job.

Cure chemistry, substrate limits and modulus. Acetoxy on metal, mirror or stone is the most expensive mistake in sealant.

Gap filling against movement accommodation. They look interchangeable in the cartridge and are not.

Where standard grades give up, what replaces them, and why a datasheet temperature is not a service temperature.

The surface preparation decides this bond. Adhesive selection is the second question, not the first.

What to ask a supplier for, what the test report has to state, and what a compliant grade costs you in dry time.

REACH restricts substances, not total VOC. An SVHC declaration and a VOC figure answer different questions.

Surface preparation through to cure, with the open-time window that causes most failures set out step by step.

Spray pattern, tack level and why overspray costs more than it looks on an open-cell substrate.

Coverage, roller pressure and the causes of blistering in service.

Which product for lasting, sole attach, insole and toe puff — they each behave differently.

Transit times, humidity, and the documentation the region asks for.

Container quantities, heat stability and Gulf customs documentation.

MOQ, drum formats and the practicalities of a 30-45 day sea leg.